60kPa Mason Jar Vacuum Sealer: Best Wholesale Guide
A 10,000-unit order lists at $5.90 per unit versus $7.90 at 200 units, so tier selection changes the unit basis by $2.00 before freight. A mason jar vacuum sealer is a cordless device that removes air through a compatible jar lid; buyers should judge interface fit, repeatability, battery capacity, and safety instructions together.
// 01 — Key takeaways
Guilin Prime Household Products Co., LTD has supplied export markets since 2005; buyers can review our factory verification and Trust Center.
Catalog suction pairs with a 3.5 L/min ±15% flow rate for the UAH01H jar interface.
The lithium battery is catalog-rated for 100 uses per charge; sample testing should mirror the buyer’s jars.
Two listed sealing widths support built-in wide- and small-mouth mason jar interfaces.
The first UAH01H catalog tier is $7.90 per unit, with a minimum 12-month warranty.
// 02 — Buyer decision
What should wholesale buyers check first?
Buyers should approve the lid interface before debating suction or unit price. A 60 kPa claim has little commercial value if regional jar rims leak, silicone adapters deform, or users cannot repeat the seal. Test actual jars, both modes, charging behavior, opening force, and instructions in one sample protocol.
Does the jar interface match the target market?
UAH01H lists 7 cm and 8.6 cm sealing widths, built-in wide- and small-mouth interfaces, and universal silicone rubbers. Those catalog details define the intended fit, but they cannot represent every private-label jar sold in every market.
Send the factory the jars, lids, or dimensioned drawings used by the customer program. During sample approval, try new lids and representative reused lids. Reject chipped glass, distorted rims, damaged sealing compound, or parts outside the agreed specification. Record which adapter, mode, and release method produced each accepted result.
What belongs in a mason jar vacuum sealer sample approval record?
Use the target-market components and the UAH01H product specification, then complete one compact record for every sample configuration.
| Approval field | Record |
|---|---|
| Jar/lid ID | Component reference used for this cycle |
| Mode | Selected mode |
| Cycle result | Observed cycle and seal result |
| Release result | Observed opening result and method |
| Accessory count | Count received by accessory type |
| Pack-out check | Carton, labels, instructions, and protection checked |
Attach the completed record and approved sample reference to the purchase order. Set acceptance criteria for the actual program rather than importing an unsupported generic threshold.
// 03 — Specifications
Which mason jar vacuum sealer specs matter?
Use the catalog table as the specification control point. Read pressure, airflow, fit, power, and battery behavior as one system, then verify the configured sample on the buyer’s jars.
UAH01H catalog spec sheet
Rev. 2026.08
| Spec | This model | Why it matters |
|---|---|---|
| Material | ABS+ Silicon | Defines the listed housing and sealing-interface materials. |
| Power | 15 W | Provides the catalog electrical rating for the appliance. |
| Motor voltage | 7.4 V | Guides approved battery, motor, and charging configuration. |
| Battery capacity | 2000 mAh | Supports cordless operation; the catalog lists 100 uses per charge. |
| Suction | 60 kPa | States the product’s nominal vacuum-pressure specification. |
| Flow rate | 3.5 L/min ±15% | Describes the catalog air-removal rate and its stated tolerance. |
| Sealing width | 7 cm / 8.6 cm | Matches the built-in small- and wide-mouth interfaces. |
| Accessories | Vacuum bags, external vacuum hose, lid opener, sealing lid, suction cup, sealing plug, wine sealer | Defines what the catalog kit can include; confirm the final packing list in the quotation. |
What does 60 kPa tell a buyer?
Sixty kilopascals is the listed suction specification, not a promise that every lid will seal. Pressure performance must be interpreted with airflow, adapter leakage, lid geometry, and the stopping logic used by the product.
Compare samples on the same jar and lid rather than comparing isolated claims from different test setups. Record whether the lid stays seated after removal, whether its center remains drawn down, and whether the result survives the agreed observation period. A clear acceptance method matters more than a larger number printed without context.
How should buyers verify the battery claim?
Use the charging cable and power source intended for the retail kit. Begin from a defined charge state, count completed seals on the target lids, record the selected mode and any change in cycle behavior, and put that method into the inspection plan.
What do the dimensions mean for cartons?
The unit is listed at 103 × 103 × 138 mm with 0.45 kg net weight. Its package is 107 × 107 × 145 mm and 0.5 kg gross weight. These figures let a buyer review shelf, master-carton, and fulfillment fit.
The catalog master carton holds 30 units, measures 550 × 340 × 310 mm, and has a listed gross weight of 17.2 kg. Confirm any private-label insert, added accessory, or thicker retail carton before finalizing freight data because a packaging change can alter packed dimensions and weight.
// 04 — Food safety
Can a mason jar vacuum sealer replace heat canning?
No. A mason jar vacuum sealer removes air but supplies no tested heat process, so it cannot replace boiling-water, atmospheric-steam, or pressure canning. Wholesale instructions must state this boundary plainly. Perishable contents remain subject to refrigeration or freezing rules, while shelf-stable canning still requires a research-based processing method.
Why is a vacuumed lid not the same as canning?
A vacuum can hold a lid down without making the food commercially sterile or shelf-stable. The University of Minnesota Extension guidance on vacuum-sealing mason jars explains that these devices do not apply the heat treatment used in established canning processes.
This distinction belongs in the manual, carton, product listing, and customer-service script. Avoid images that imply hot-fill preservation when the device has only removed air. A clear warning protects the end user and reduces distributor exposure to a preventable misuse claim.
What foods are practical for dry storage?
Thoroughly dried grains, legumes, herbs, spices, nuts, seeds, and dehydrated produce are practical candidates when the jar, lid, and contents are dry. The device packages them at room temperature; it does not perform an oven process.
The National Center for Home Food Preservation guidance on dry-food storage distinguishes recommended room-temperature vacuum packaging from untested oven “dry canning.” That distinction gives brands a sound content angle: storage quality and moisture protection, not an unsupported canning claim.
What about sauces, produce, or cooked food?
Foods that required refrigeration before vacuuming generally still require refrigeration afterward. Air removal does not reset the food’s safety clock or make a perishable recipe safe on a pantry shelf.
Instructions should tell users to follow established storage temperatures and discard food showing spoilage or a lost seal. They should also avoid exact shelf-life promises unless the brand has product-specific evidence for the food, container, process, and temperature. A device specification alone cannot establish food shelf life.
// 05 — Operation
How do you use a mason jar vacuum sealer?
Fill a sound compatible jar, clean and dry its rim, place an undamaged lid, center the correct interface, select the intended mode, and let the cycle finish. Then remove the device, check that the lid is held down, label the contents, and store the food under its normal safety conditions.
How should the jar be prepared?
Start with a jar that has no cracks, chips, or rim damage. The rim and lid contact surface must be clean and dry. Leave enough empty space to keep loose powder, liquid, or food particles away from the air path.
Choose the 7 cm or 8.6 cm interface that matches the lid. Place the lid according to the retail instructions. Do not improvise an adapter or force a poor fit. For private-label approval, photograph correct placement and common errors so the manual can teach the process without relying on technical language alone.
What happens during the sealing cycle?
The UAH01H mason jar vacuum sealer uses its pump to remove air through the lid interface while the LED display communicates operation. Two sealing modes are listed. The final manual should identify each mode by its approved user-facing name and purpose.
Keep the device level and let the programmed cycle end. Repeatedly lifting or twisting the unit during operation can disturb the interface. If a seal fails, inspect the rim, lid, adapter, and alignment before simply running more cycles. This sequence helps customer support separate a fit problem from an appliance problem.
How do you know whether the jar sealed?
A successful lid should remain held against the jar after the appliance is removed. Check it without using force that could damage the jar. The exact verification step should match the approved lid system.
Label the jar with contents and date, then apply the food’s normal storage rule. Before reuse, release the vacuum with the intended opener or method. If the lid is loose, the rim is contaminated, or the jar is damaged, repeat the preparation with sound components rather than treating a partial seal as acceptable.
// 06 — Commercials
What do UAH01H price tiers mean?
Use the published tier table as the price control point. These are product prices, not landed costs; confirmed packaging, tooling, compliance, freight, insurance, duty, and local handling remain separate.
How does the catalog price change with quantity?
The catalog reduces unit price as the order moves through listed quantity breaks. A buyer should compare the full order value and inventory risk, not assume that the lowest unit price always creates the best program.
| Catalog quantity | UAH01H price per unit | Catalog difference from 200-unit tier |
|---|---|---|
| 200 units | $7.90 | Baseline |
| 500 units | $7.50 | $0.40 lower per unit |
| 1,000 units | $7.20 | $0.70 lower per unit |
| 10,000 units | $5.90 | $2.00 lower per unit |
Request a written quotation for the exact configuration. A logo print, color change, translated manual, accessory choice, or retail-box revision can change what is included. Keep product price and logistics assumptions in separate lines so finance teams can update freight without rewriting the product comparison.
// 07 — Manufacturing
How we manufacture the UAH01H program
The Trust Center documents an owned 15,000 m² Guilin facility with 7 assembly and test lines and 205 staff across engineering, assembly, and QC. Within that factory, the approved sample, bill of materials, artwork, accessories, and inspection criteria form the release package for tooling, assembly, function checks, and pack-out.
In-house tooling and private mould control
Tooling, components, finish, logo placement, colorway, retail packaging, and manual requirements are reviewed against the approved specification. Any requested change should receive a new sample or written approval before the production release.
Pump, PCBA, charging, and control checks
The inspection plan covers pump and motor function, PCBA control behavior, charging, battery operation, and the display. Record the configured sample and agreed result for each check; no unstated duration or test limit is claimed.
Quality control and seal-function testing
Every batch is subject to line testing. Jar-interface fit, two-mode operation, suction function, charging, cosmetic condition, accessories, label accuracy, and pack-out can be tied to the approved sample and purchase-order checklist.
Certification names and 12-month warranty
CE and RoHS are the relevant export certification names in this program; order-specific scope and destination requirements must be confirmed before production. The product carries a minimum 12-month warranty, with final service terms recorded in the sales agreement.
We answer fast, we honour our specifications, and we treat your first order as the start of a partnership.
— Mi Lan, Founder, Guilin Prime Household Products Co., LTD
// 08 — B2B fit
Who should source this mason jar vacuum sealer?
The UAH01H mason jar vacuum sealer suits distributors, retailers, promotional programs, and private-label brands that need a compact cordless jar-sealing kit with two lid interfaces. It is strongest when the buyer controls product claims, approves real market jars, and treats instructions and packaging as part of the appliance specification.
Why does it fit distributors and retailers?
Build the launch around demonstrable functions: correct lid fit, air removal, portability, and storage organization. Train customer service on canning boundaries and seal troubleshooting, and keep spare-accessory and warranty routing clear.
What can a private-label buyer customize?
The catalog supports OEM and ODM work for logo, colorway, retail packaging, and manual requirements. Each change needs a defined artwork file, color reference, packing list, approval owner, and revision date.
Vacuum Sealer China operates in vacuum sealing machines (manufacturer & trading company). It sells its machines and coordinates the commercial program; it is not presented as a sourcing agent. Use the exact legal seller, Guilin Prime Household Products Co., LTD, on contracts and compliance records where applicable.
What should the purchase order lock down?
The purchase order must state the selected quantity, price, product revision, color, logo, language, accessories, carton marks, inspection criteria, warranty route, and approved sample reference.
Lead time, Incoterm, payment schedule, tooling charges, sample terms, compliance documents, and freight are order-specific and should appear in the written quotation or sales contract. Omitting an unsupported number is safer than treating a generic trade assumption as a promise. Send the target country, annual volume, jar samples, and desired launch date with the inquiry.
// 09 — Questions
Mason jar vacuum sealer FAQ
These short answers point back to the primary operating, safety, specification, and commercial sections above.
How do vacuum-sealing mason jars work?
Can I use a mason jar vacuum sealer for canning?
What foods can be vacuum sealed in mason jars?
Does the UAH01H fit both common mason jar lid sizes?
How many seals can the 2000 mAh battery make per charge?
What is the catalog MOQ for UAH01H?
// 10 — Conclusion
Is UAH01H the right wholesale choice?
UAH01H is the right wholesale choice only when the actual market jars and configured kit pass the documented sample review and the purchase order locks claims, packaging, accessories, and service.
Featured model: UAH01H
View the live product record and request a quotation for the exact approved configuration.
Featured product
UAH01H Mason Jar Vacuum Sealer
Use the product record as the current configuration reference.
What should you send with the inquiry?
Send the destination market, planned quantity, jar and lid dimensions, preferred color, logo file, packaging language, accessory list, required compliance scope, inspection method, and launch target. This information lets the product team answer with a configuration-specific quotation instead of a generic estimate.
Ready to order or need a wholesale quote?
Vacuum Sealer China manufactures these appliances direct from our Guilin, China factory — OEM, private-label and B2B welcome. Tell us your market, jars, and volume.
Featured model
Vacuum Sealer, 65kPa, 30 cm Seal, Roll Storage (VS-TGX4)
This vacuum sealer is made direct-from-factory and offers 65kPa and 30 cm seal, featuring roll storage, from Guilin Prime Household Products. Available OEM/ODM with low MOQ…
from $14.00
Similar products
Vacuum Sealer, 65kPa, 30 cm Seal, Roll Storage, Temp Control
Vacuum Sealer, 70kPa, 30 cm Seal, 10 Modes, 120W
Vacuum Sealer, 75kPa, 30 cm Seal, Touch Screen, Temp Control
Vacuum Sealer, 75kPa, 30 cm Seal, Temp Control
Ready to order or need a wholesale quote?
Guilin Prime Household Products Co., Ltd. manufactures these vacuum sealers direct from our Guilin, China factory — OEM, private-label and B2B orders welcome. Tell us your target market and quantities for a factory-direct quote within 24 hours.