A 3 mm heating strip has to close a 30 cm bag cleanly, or a 65kPa label will not prevent returns. The UAH32G vacuum sealer is a 120W external-suction machine with roll storage, a sliding cutter and a listed 4 L/min ±15% flow rate; buyers should decide on seal results, workflow, carton data and quoted terms.
// 01 — Key takeaways
The manufacturer was founded in 2005 and exports direct to 56+ countries. UAH32G carries a 12-month warranty. Review the Vacuum Sealer China Trust Center for factory facts.
Catalog suction is one input; bag evacuation and seal retention decide acceptance.
The sealing width pairs with a 3 mm heating strip and built-in roll handling.
The listed flow rate carries a ±15% tolerance, so the brief should preserve that full value.
One listed export carton is 55×39×32 cm and 17 kg.
// 02 — Specifications
Which vacuum sealer specifications decide the UAH32G order?
The decision rests on the 65kPa suction target, 4 L/min ±15% flow rate, 30 cm sealing width and 3 mm heating strip as one system. Power, voltage, bag stock and operator steps then determine whether the UAH32G fits the range. No single headline number replaces a sealed-bag trial.
UAH32G specification sheet
Rev. 2026.08
| Specification | UAH32G catalog value | Why it matters to a buyer |
|---|---|---|
| Material | ABS | Defines the listed housing construction. |
| Accessories | Food vacuum sealing bags; external vacuum hose | Sets the supplied-use scope that belongs in the quotation. |
| Rated power | 120W | Supports electrical labeling and market documentation. |
| Input voltage | 100-240V | Allows one electrical platform to be configured for destination-market plugs. |
| Sealing width | 30 cm | Caps the listed width of the bag mouth placed across the bar. |
| Heating strip width | 3 mm | Defines the heating element line used to form the closure. |
| Suction | 65 kPa | States the catalog vacuum target for the external-suction system. |
| Flow rate | 4 L/min ±15% | Describes evacuation flow and its stated tolerance. |
The table carries the current catalog values. The acceptance plan should measure suction, evacuation behavior, strip condition and seal continuity on the ordered bag material rather than treating the data sheet as a finished performance report.
How should a vacuum sealer buyer read 65kPa?
Read 65kPa as the listed pressure target of the whole evacuation path, not as a seal-quality score. A leak at the bag mouth, a blocked channel or a poor lid closure can defeat the result even when the pump is operating. Record both evacuation and the finished closure during the trial.
A useful product brief keeps pressure and flow separate. Pressure describes the vacuum level target. Flow describes how quickly air moves under stated conditions. UAH32G lists 4 L/min with a ±15% tolerance, so dropping the tolerance from sales copy would turn the catalog value into a different claim.
Why do 30 cm and 3 mm belong together?
The 30 cm figure describes the listed seal span, while 3 mm describes the heating strip width. Together they frame which bag mouths fit and how the closure is formed. Buyers should lay their intended bag assortment across the bar and inspect the entire line, including both edges and any folds.
Roll storage and a sliding cutter make width selection part of the machine workflow. They do not change the maximum listed seal width. Retail instructions should show operators how to cut a square mouth, leave a clean sealing zone and place that zone flat across the strip.
What does 100-240V solve for an importer?
The 100-240V input supports a shared electrical platform across more than one voltage market, but it does not make plugs, labels or compliance files universal. Put the destination, plug form, rated-frequency label and manual language into the order brief so the finished retail unit matches its market.
// 03 — Range fit
What does roll storage change in a vacuum sealer range?
Built-in roll storage and the sliding cutter make UAH32G a workflow-led model: an operator can size material beside the sealing bar, then vacuum and seal from the same station. That proposition differs from a stainless-panel model or a cutter-only model even when suction, power and seal width match.
Where does the integrated roll path add value?
The roll path reduces the number of loose tools at the packing point and gives a retail demonstrator a clear sequence: pull, cut, close one end, fill, evacuate and seal. For a distributor, that is a feature story grounded in a visible part rather than an unsupported preservation promise.
Bag-roll dimensions are not stated in the picker record. Put the intended roll width, core, film construction and retail refill plan into the inquiry. That keeps the machine feature tied to the consumable program the buyer actually intends to sell.
How does UAH32G compare with two fetched sibling models?
The three fetched models share 120W power, 65kPa suction and a 30 cm seal, so the range decision turns on housing and bag-preparation features as well as the real tier prices. UAH32G carries roll storage plus a sliding cutter; UAH26G adds a stainless-steel panel; UAH36GX lists a built-in cutter.
| Fetched model | Housing / preparation feature | Core catalog specifications | Lowest listed tier |
|---|---|---|---|
| UAH32G | ABS; roll storage; sliding cutter | 120W; 65kPa; 30 cm; 4 L/min ±15% | $12.20/unit at 5,000 units |
| UAH26G | ABS + stainless steel; stainless-steel panel | 120W; 65kPa; 30 cm; 4 L/min ±15% | $10.70/unit at 5,000 units |
| UAH36GX | ABS; built-in bag cutter | 120W; 65kPa; 30 cm; 4 L/min ±15% | $8.30/unit at 5,000 units |
This comparison uses direct SKU records fetched for all three models. It does not infer a sibling specification from a rotating similar-products list.
// 04 — Sample test
How should a buyer test the UAH32G sample?
Use the exact bag stock and roll format planned for sale, then observe preparation, evacuation, closure and clean-down as separate stages. The test should expose a crooked cut, channel leak, liquid movement or weak seal before those faults reach retail packaging. Record the setup beside every result.
Start with the bag and seal setup
Cut the intended roll on the sliding cutter and compare the cut edge with a pre-made bag. Place each mouth flat across the bar, keep the sealing zone free of folds and note whether the 30 cm span covers the widest planned format. Inspect the full closure under consistent light.
Repeat with the narrowest and widest retail formats in the proposed assortment. The goal is not to create a universal pass claim. It is to find the bag, placement and mode combination that belongs in the user manual and factory acceptance sheet.
Run dry and wet-mode trials separately
The feature record lists Vac, Seal, Rice, Wet, Dry and Stop modes. Use dry and controlled moist contents as different test cases because liquid near the mouth changes the sealing condition. Record which mode was selected, what reached the channel and whether the finished line stayed continuous.
Do not turn a mode name into a food-safety claim. The machine removes air and heat-seals compatible bags; temperature control and food-handling rules remain separate. This distinction matters in retail copy, distributor training and food-service use.
Inspect the hose, controls and detachable base
Fit the supplied external vacuum hose to the intended accessory interface, exercise each relevant control and stop a cycle deliberately. Then remove the detachable base and review where residue can collect. A buyer can turn those observations into accessory lists, cleaning diagrams and spare-part questions without inventing performance numbers.
A pressure label starts the shortlist; the cut, evacuation path and finished seal decide whether the machine belongs in the range.
— Mi Lan, Founder, Guilin Prime Household Products Co., LTD
// 05 — Pricing
What do the UAH32G price tiers tell a wholesale buyer?
The current catalog ladder runs from $13.00 at 1 unit to $12.20 at 5,000 units, with listed points at 20 and 500 units between them. Those values show the product-price curve only. A usable quotation must also define configuration, packaging, compliance scope, trade terms and destination.
UAH32G catalog price ladder
USD per unit
| Listed quantity | Listed unit price | Buyer use |
|---|---|---|
| 1 unit | $13.00 | Catalog entry point |
| 20 units | $12.80 | Matches one listed export-carton quantity |
| 500 units | $12.60 | Mid-volume catalog tier |
| 5,000 units | $12.20 | Lowest listed catalog tier |
How should the tier ladder be read?
Read each quantity and unit price as a pair. The 20-unit point also matches the listed export-carton count, while the other tiers do not state a carton or pallet plan. Keep the selected quantity, currency and configuration on the same quotation line so a price is not detached from its basis.
What sits outside the listed unit price?
Artwork, colorway, retail packaging, manual language, destination plug, order-specific compliance work, freight, duty and local handling can change the commercial total. EXW, FOB China and CIF also allocate work and risk differently. The purchase comparison should therefore separate factory unit price from landed cost.
Which OEM fields belong in the RFQ?
Guilin Prime Household Products Co., LTD handles logo, colorway, retail packaging and manual work in-house for OEM/ODM programs. The catalog record does not state a configured numeric MOQ or production lead time, so both belong as explicit fields in the written quotation alongside Incoterm, payment terms and warranty route.
Business scope: Vacuum Sealer China covers vacuum sealing machines (manufacturer & trading company). The quotation comes from the seller of the machine and its configured program, not from a sourcing-agent service.
// 06 — Logistics
How does the 20-unit carton affect logistics planning?
UAH32G lists 20 units in a 55×39×32 cm export carton weighing 17 kg. Each packaged unit is listed at 37×13.2×6 cm, while the product itself is 36.5×11×5.5 cm and 0.78 kg gross. Those figures support carton handling, receiving and storage planning.
What can a warehouse plan from these figures?
A receiving team can plan the carton lift, shelf aperture and unit pick face from the listed dimensions and weights. The figures also let a buyer compare retail-pack depth with the product body. They do not state pallet layout, container count or dimensional billing, so those require the final shipping plan.
What belongs on the shipping data sheet?
Carry the product size, product gross weight, individual package size, carton size, carton quantity and carton weight as separate labeled fields. Add the final barcodes, marks, country requirements and Incoterm beside them. This prevents a unit dimension from being mistaken for a carton dimension during freight quoting.
// 07 — Buyer fit
Who should shortlist this vacuum sealer?
UAH32G fits buyers who want a 30 cm external-suction platform with roll preparation built into the countertop workflow. It gives distributors, private-label programs and light-commercial resellers a concrete feature story. Buyers needing chamber handling, an unstated duty cycle or wider bags should use a different specification brief.
Retail and distributor ranges
Retail teams can demonstrate roll storage, the sliding cutter, LED display, waterproof touchscreen, external hose and named operating modes. The 100-240V input supports market variants from one platform. The sell-in deck should still show the destination plug, included accessories and compatible bag format for the configured SKU.
Private-label programs
OEM and ODM buyers can define logo, colorway, package and manual work with the factory. Start with the UAH32G mechanical platform, then freeze the visible controls, claim wording, carton marks and accessory list in the order file. That keeps brand customization connected to a specific tested configuration.
Light-commercial placements
The product record positions UAH32G for household and light-commercial food preservation. A deli counter, small prep room or retail demonstration can be a use case only when its workload passes the buyer’s cycle test. The catalog does not present UAH32G as a chamber machine or state continuous-duty performance.
// 08 — Manufacturing
How do we manufacture the UAH32G vacuum sealer?
The factory sequence links tooling, pump and PCBA burn-in, line quality control, seal testing and export compliance review before packing. UAH32G is not bought through a hidden sourcing chain: the product record states that tooling, components, finish and OEM/ODM changes are controlled within the Guilin operation.
In-house tooling and private mould work
Tooling and finish control establish the ABS housing, roll-storage path, sliding-cutter fit and detachable-base interfaces. Private-label changes begin with the frozen colorway and artwork brief so visible parts and retail presentation refer to the same ordered version.
Pump and PCBA burn-in
The pump and control board move through burn-in before final line release. This stage targets electrical and control faults before the housing is packed. The order file should preserve the 120W, 100-240V, 65kPa and 4 L/min ±15% catalog references used for the model.
UAH32G batch line testing
The UAH32G product record states that every batch goes through line testing before shipment. It does not publish a measured sample result or numeric pass rate, so this article claims neither. Buyers can use the practical bag-and-seal routine above to set observable release criteria for the configured order.
CE, RoHS and 12-month warranty
CE and RoHS are the named export-compliance references; the applicable documentation follows the ordered product and destination. UAH32G carries a 12-month warranty. The commercial file should state the warranty contact, claim evidence, remedy path and any spare-parts arrangement for the buyer.
// 09 — Food use
What food-use boundaries belong in the buyer brief?
A vacuum sealer removes air and closes a compatible package; it does not make food shelf stable or replace refrigeration, freezing and regulated handling. Buyers should keep machine claims separate from food-process claims. That line protects manuals and retail copy from promising a safety outcome the appliance alone cannot deliver.
What is vacuum packaging and modified atmosphere packaging?
The USDA Food Safety and Inspection Service explains that vacuum packaging removes air from a package, while modified-atmosphere systems replace some or all oxygen with other gases. UAH32G is presented as an external vacuum sealer, not as a gas-flush packaging system.
Is it safe to freeze meats in grocery-store packaging?
The USDA freezing guidance says original wrap can be safe for freezing but may be air-permeable, so quality can diminish over time; it also says unopened vacuum packages can be frozen as they are. Retail copy should cite handling guidance, not promise a universal storage extension.
Does vacuum sealing make food shelf stable?
No. The FDA Food Code treats vacuum packaging within reduced-oxygen packaging and sets process controls for retail and food-service settings. A machine specification is not a HACCP plan. Users must follow the rules, temperature controls and labeling duties that apply to their food and jurisdiction.
// 10 — Buyer questions
What do buyers ask about the UAH32G vacuum sealer?
Buyers most often need five answers before requesting a configured quote: whether 65kPa fits the intended bag task, what the roll system includes, which width the bar accepts, how the real price tiers read and what information the factory needs. The answers below stay within the fetched product record.
Is 65kPa enough for the UAH32G vacuum sealer?
Does UAH32G include roll storage and a bag cutter?
What bag width can the UAH32G seal?
What are the listed UAH32G price tiers?
What should an importer put in a UAH32G inquiry?
// 11 — Decision
Conclusion: Should UAH32G enter your vacuum sealer range?
Shortlist UAH32G when built-in roll handling suits the channel and the planned bags pass the practical routine above. The product, price and comparison tables preserve the catalog record; the purchase order should identify the exact market configuration, OEM scope, quote basis and acceptance criteria rather than relying on one headline suction figure.
Its differentiator is the bag-preparation workflow: roll storage and a sliding cutter sit beside the external-suction platform. Choose it over the fetched siblings when that workflow earns its place in the retail range, then attach the accepted configuration to the order.
Featured model · UAH32G
UAH32G / VS-32G roll-storage vacuum sealer
120W · 65kPa · 30 cm sealing width · 4 L/min ±15% · 3 mm heating strip
From $12.20/unit at the listed 5,000-unit tier
Featured model
Vacuum Sealer, 65kPa, 30 cm Seal, Roll Storage (VS-TGX4)
This vacuum sealer is made direct-from-factory and offers 65kPa and 30 cm seal, featuring roll storage, from Guilin Prime Household Products. Available OEM/ODM with low MOQ…
from $14.00
Similar products
Vacuum Sealer, 65kPa, 30 cm Seal, Roll Storage, Temp Control
Vacuum Sealer, 70kPa, 30 cm Seal, 10 Modes, 120W
Vacuum Sealer, 75kPa, 30 cm Seal, Touch Screen, Temp Control
Vacuum Sealer, 75kPa, 30 cm Seal, Temp Control
Ready to order or need a wholesale quote?
Guilin Prime Household Products Co., Ltd. manufactures these vacuum sealers direct from our Guilin, China factory — OEM, private-label and B2B orders welcome. Tell us your target market and quantities for a factory-direct quote within 24 hours.